C‑DRONE

🫧 HIGH-ACCESS CLEANING · NANTES (44) · €500–2,500 PER JOB

Drone high-access cleaning in Nantes

Cleaning drones project water and treatment solutions at high pressure onto high surfaces, without scaffolding, lift platforms or rope access: roof moss removal, facade cleaning, industrial cladding, soiled photovoltaic panels, glass canopies and steel structures. Fed from the ground through a hose connected to a pumping station, the drone treats 300 to 500 m² per hour depending on the surface — two to four times faster than traditional access methods, at a markedly lower cost as soon as the height exceeds two storeys.

We match the treatment to the substrate: low-pressure rinsing with deionised water for solar panels (no streaks), certified moss killer for roofs, appropriate detergents for cladding and render. The gain is not merely cosmetic: clean panels recover several percent of output, a de-mossed roof lasts longer, maintained cladding keeps its manufacturer warranty.

Free quote — high-access cleaning in Nantes

Rates

€500–2,500 per job — the range observed on the 2026 French market, including regulatory preparation, flight and delivery. The exact quote depends on the site, the deliverable and the airspace context in Nantes.

Common use cases

The local context in Nantes

The Nantes-Atlantique CTR spreads over the south-west of the city and covers much of the metropolitan area: flights there require a protocol with the airport, while the dense historic centre falls under the built-up-area scenario with notification to the Loire-Atlantique prefecture. The hospital helipad on the Île de Nantes and the Airbus facilities in Bouguenais call for extra care.

The Nantes market is among the most dynamic in western France: the Île de Nantes regeneration and creative district, shipyards and industry along the lower Loire, Euronantes office developments, Muscadet vineyards at the city gates and a distinctive heritage — the Dukes' castle, the Machines de l'île — highly photogenic from above.

Applicable regulations

Cleaning drones are heavy machines (10 to 25 kg with the loaded hose): they fall outside the open category for most jobs and operate in the specific category, under a scenario or an operational authorisation with SORA risk assessment, especially as they often fly in built-up areas right next to buildings. The ground area is always cordoned off and closed to the public during treatment (risk of falling water and spray). Environmental rules also apply: approved treatment products, controlled recovery or infiltration of runoff depending on the site, no direct discharge of biocides into storm drains. AlphaTango registration, pilot trained in tethered flight with payload, coordination with the building operator.

Frequently asked questions

Does drone cleaning damage tiles or panels?

No: pressure is adjusted to the substrate (low pressure on tiles and panels, never destructive high pressure) and the drone never touches the surface — unlike foot traffic, which cracks tiles.

What output gain can be expected after solar panel cleaning?

Depending on soiling (dust, pollen, bird droppings, agricultural or industrial deposits), observed gains range from 3 to 15% of output. A thermal inspection can be combined with cleaning to detect faulty modules.

Do water or power need to be cut during the work?

We bring our own water supply (tank and pumping station). For photovoltaic panels, shutting down the inverters during washing is recommended; we coordinate this with your plant operator.

Can this service be flown anywhere in Nantes?

Almost: CTR de l'aéroport Nantes-Atlantique; Hélistation du CHU sur l'île de Nantes; Emprises Airbus de Bouguenais. Depending on the exact location, the pilot picks the right framework (open or specific category) and files the required declarations — included in the quote.

Other drone services in Nantes

High-access cleaning near Nantes

High-access cleaning: every city →

Going further