C‑DRONE
Drone flying close to a building facade for inspection

🏢 FACADE INSPECTION · STRASBOURG (67) · €300–1,200 PER JOB

Drone facade inspection in Strasbourg

Drone facade inspection documents a building's condition over its full height without a lift platform, rope-access technicians or road closures. Cracks, concrete spalling, loose elements, rebar corrosion, render detachment, tired expansion joints, water ingress: the high-resolution sensor, combined with zoom, records millimetre-scale defects tens of metres up. It is the ideal tool for pre-renovation surveys and the statutory monitoring of high-rise buildings.

The standard deliverable is a report organised by elevation (north, south, east, west) with defects mapped onto rectified photos, supplemented if needed by a georeferenced facade orthophoto usable by your engineering office. Property managers, architects, inspection bodies and local authorities use our surveys to prioritise works and secure perimeters where falling material is a risk.

Free quote — facade inspection in Strasbourg

Rates

€300–1,200 per job — the range observed on the 2026 French market, including regulatory preparation, flight and delivery. The exact quote depends on the site, the deliverable and the airspace context in Strasbourg.

Common use cases

The local context in Strasbourg

Strasbourg has one peculiarity: a prohibited area protects the European institutions district (Parliament, Council of Europe, Human Rights Court), on top of the Strasbourg-Entzheim CTR to the south-west. The immediate German border means flights must not spill into neighbouring airspace, and the UNESCO-listed Grande Île falls under the built-up-area scenario with prefecture notification.

The local economy offers fine missions: inspection of the river port and structures on the Rhine, thermography of demanding half-timbered old buildings, monitoring of the Archipel business district extensions, imagery for the Christmas market — France's oldest — and for the Alsatian wine route starting just outside town.

Applicable regulations

Facades to inspect are almost always in built-up areas: the usual regulatory framework is the specific category (STS-01 scenario, populated-area flight with a class C5 drone) with prior prefectural declaration, the open category over public space (open to professionals since 1 January 2026, no overflight of people, daytime only), or sub-category A1 with a sub-250 g C0 drone for small buildings. The flight is conducted a few metres from the wall, well under the 120 m limit; a ground safety perimeter is marked out when the drone operates above public space, and neighbouring owners' consent is sought when the flight requires crossing their plot. Operator registered on AlphaTango, professional aerial liability insurance and Géoportail drone-map checks are systematic.

Frequently asked questions

Does the drone fully replace an engineering survey?

No: the drone provides the exhaustive, documented visual record; structural interpretation of defects remains the engineer's or architect's job. Our reports are designed to feed directly into their analysis.

Can you inspect a facade on a busy street?

Yes, with a specific-category flight declared to the préfecture and a ground safety perimeter managed by an assistant. We often work early in the morning to minimise disturbance to pedestrians.

How accurate is the photographic survey?

At 5 m from the facade, resolution reaches roughly 1 mm per pixel: microcracks, joint defects and early corrosion are clearly identifiable and measurable on the images.

Can this service be flown anywhere in Strasbourg?

Almost: Zone interdite du quartier des institutions européennes; CTR de Strasbourg-Entzheim; Frontière allemande immédiate (espace aérien étranger). Depending on the exact location, the pilot picks the right framework (open or specific category) and files the required declarations — included in the quote.

Other drone services in Strasbourg

Facade inspection near Strasbourg

Facade inspection: every city →

Going further